Draw-Tite Max-E-Loader Class III/IV Trailer Hitch

Features

• Heavy Duty Capacity:  Max-E-Loader's Long Side Bracket Design Distributes the Towing Load Over a Greater Portion of the Tow Vehicle Frame, Making it the Ideal Receiver for Maximum Duty 12,000 lbs. (GTW) Applications.  All Frame Attachment.
• 2" x 2" Receiver Opening:  2" Square Receiver Tube Opening
• J-Pin® Ready:  Ready to tow when you are.
• Black Powder Coat Finish:  Premium Grade Black Powder Coated Finish.
• Up To 12,000lb Capacity w/ WD:  Rated up to 12,000 lbs. (GTW) with Weight Distributing(WD).  Rated up to 6,000 lbs. (GTW) Weight Carrying (WC)
• Solid All-Welded Construction:  For Maximum Strength and Safety.  Ensures Perfect Fit and Top Towing Performance.  Computer-Aided Design and Fatigue Stress Testing.  Designed to Withstand Road Abuse Within Specified Capacities.  Custom Built According to Manufacturer & Model Year.
• Nationwide Lifetime Warranty:  Backed by a Nationwide Limited Lifetime Warranty

Description

Draw-Tite Hitches is a leader in trailer hitches for pickups, cars, vans and SUVs. We offer the Class III & IV Max-E-Loader Trailer Hitch, a long side bracket design that distributes the towing load over a greater portion of the tow vehicles frame, making it the ideal receiver hitch for maximium duty 12,000 lbs gross towing weight applications. This trailer hitch has a premium black powder coated finish and solid all welded construction. All Draw-Tite trailer hitches are backed by the Draw-Tite Nationwide Limited Lifetime Warranty.

Order Notes

AA= Requires temporary removal of bumper during install.
AB= Requires four 3/8" spacer blocks #01077-011 for install. (sold separately)
AG= Draw Bar Kit and Adapter Sold Separately
AI= Additional install time required.
AL= Additional install time for vehicles with load leveling compressor.
AO= Will not fit vehicles with twin tail pipes.
AW= Will not fit turbo models.
BF= Requires standard bumper. Will not fit with step bumper.
BK= For vehicles w/out bumper. #2879 must be used (sold separately)
CA= Models with dual exhaust require exhaust modification.
CC= Requires minimum of 19" from end of frame rail to spring shackle bracket.
CN= Requires OE factory bumper for installation.
CO= Wont fit 8' bed 2500/3500 w/ heavy duty suspension package or 4 DR Crew Cabs.
CP= Fits all models without factory installed receiver.
CQ= Wont fit will heavy duty suspension.
CR= Fits w/ mini spare tire under vehicle. Won't fit with fullsize spare.
CS= Will fit w/ full size spare tire under vehicle.
CU= Includes models with large fuel tank and skid shield.
DA= Will not fit with tube style bumper.
DB= Will not fit 6ft bed pickups.
DH= Can't be installed on 87-97 vehicles w/ factory step bumpers unless step bumper and its mounting brackets are permanently removed and standard factory bumper is installed.
DX= Requires six 3/8" spacer blocks (01077-011) and size 1/2-13 x 2-1/4" GR5 carriage bolts (01266-009) which are not provided.
EB= Factory electrical bracket will not fit with this hitch. Must used aftermarket electrical box or bracket.
EF= Fits all models with standard bumpers.
EO= Requires longer ball mount.
EP= Fascia trimming required.
EK= Extended Cab only.
FE= Fascia trimming required - allow additional install time.
FM= Vehicles w/load leveling, air pump mounting modification required.
FP= Spare tire repositioning and/or modification of spare tire carrier may be required.
FS= Includes 2 & 4WD models with heavy duty suspension.
FX= Fits vehicles w/spacer between E/A unit and frame built before Jan '93 and after Mar '93.
GH= Will not fit models with 34" wide frames.
GO= Requires hitch w/ packaging date code 2-15-94 or later.
GP= Hitch Crosstube concealed behind bumper.
GU= Wont fit w/ factory or aftermarket lower fascia/rollpan or tube bumper.
GW= Spare tire can't be stowed under vehicle on short wheelbase models equipped w/15" or full size spares.
GX= Requires fabrication of "L" bracket to reposition exhaust on 95 and later 6ft box models.
HA= External dress panel beneath 95-97 and 03-05 must be removed for hitch installation.
HB= Slight fascia deformation may occur on some models.
HC= Will not fit with mini or fullsize spare tire stowed under vehicle.
HD= Will not fit 6ft bed pickups except 6ft bed super cab.
HK= Under vehicle spare tire carrier may be retained with aftermarket spare tire repositioner. Cutting of rollpan near license plate required for receiver tube access. Does not fit with bumper.
HM= Hitch Crosstube visable beneather bumper.
HX= Minor exhaust modification may be required.
HY= Ultra Frame ball mount#4283 cannot be used in rise position on vehicles with step bumpers.
J= Under vehicle spare tire stowage is retained.
JF= Will not fit with 16" spare.
JL= Installation requires OEM bumper and brackets.
JR= Exhaust must be temporarily lowered for install.
JT= 2WD models only.
K= Adapter kit #1685 required with #41504 for 1980 & later F-Series Pickups.
KF= Will not fit flareside.
KH= Minor heat shield modifaction maybe required.
KK= When installing on vehicle originally equipped with OE Hitch. OE bumper brackets must be purchased prior to new hitch install.
KL= Hitch is designed to attach beneath the OEM hitch.
L= Exhaust respositioning required.
LT= Requires removal of factory hitch if equipped.
M= Will fit w/ heavy duty suspension.
O= Will not fit vehicles equipped with dual exhaust exiting below the bumper.
P= For 124" wide wheelbase and E350 models. Adapter kit #2626 is required (sold separately)
RB= Hitch install is easier with a cutter type drill bit.
RO= Will not fit Silverado SS
SA= Requires drilling on 6ft bed models.
SD= Hitch produced before 07/06 rated at 350/3500WC
SG= Hitches produced before 9-10-07 rated at 1000/10,000 WC & 1200/12,000 WD.
SH= Hitches products before 9/27/07 rated at 1200/12,000 WC & 1400/14,000 WD.
T= Vans with step bumpers require longer ball mounts.
TA= Truck access required for installation.
TF= For 3/4 & 1 Ton vehicles only.
U= Cannot be used on vehicles with step bumpers.
VB= Will not fit vehicles with vibration damper installed at rear of frame on driver side.
X= Minor fascia trimming required.
#= Titan hitches require 2-1/2" shank ball mount
@=Ultra Frame ball mount must be used for max weight rating.

Draw-Tite Max-E-Loader Class III/IV Trailer Hitch Feature Images

	Draw-Tite Rear Class III And IV Max-E Loader Receiver Hitch: Up To 12,000lb Capacity w/ WD: Rated up to 12,000 lbs. (GTW) with Weight Distributing(WD). Rated up to 6,000 lbs. (GTW) Weight Carrying (WC)
	Heavy Duty Capacity: Heavy Duty Capacity: Max-E-Loader's Long Side Bracket Design Distributes the Towing Load Over a Greater Portion of the Tow Vehicle Frame, Making it the Ideal Receiver for Maximum Duty 12,000 lbs. (GTW) Applications. All Frame Attachment.

Draw-Tite Max-E-Loader Class III/IV Trailer Hitch Warranty

1. Warranty and Warranty Period. Draw-Tite warrants to the original Purchaser/ Consumer of the Products that Draw-Tite will provide free of charge the replacement of any Products which are defective in material or workmanship (the "Warranty"). This Warranty applies only to the original Purchaser/Consumer of the Products for as long as the original Purchaser/Consumer owns the vehicle on which the Products were installed. Defective Products returned to Draw-Tite become the property of Draw-Tite.
    
   
2. Limitations on the Warranty. The following limitations apply tothe Warranty:
    
   
   1. The Warranty applies only to Products which are defective in material or workmanship. This Warranty does not cover normal wear and tear. The Warranty does not cover service or labor charges which are incurred in removing or replacing any Products.
       
      
   2. The Warranty does not cover the finish placed on Products by Draw-Tite. Accordingly, Draw-Tite will not replace, repair or refinish any Products if the finish on the Product is worn in any manner.
       
      
   3. The Warranty does not extend to Products which are damaged or which fail as a result of the Products being abused, neglected, or misused in any manner, or as a result of any accident, or which are misapplied, overloaded, improperly installed, or altered in any manner by anyone other than Draw-Tite.
       
      
3. Obligations of Purchaser/Consumer. To obtain the benefits of the Warranty, the Purchaser/Consumer must complete the following steps:
    
   
   1. The Purchaser/Consumer must present the defective Product(s) together with proof of purchase to any of Draw-Tite's branches or its factory or to any authorized Draw-Tite dealer listed in local telephone directories.
       
      
   2. The Purchaser/Consumer must pay all handling, transportation, and shipping charges incurred for the return of the defective Products to Draw-Tite and for delivery of the replacement Products by Draw-Tite to the Purchaser/Consumer.
       
      
4. Obligations of Draw-Tite. Subject to the terms and limitations set forth in this document, Draw-Tite will provide replacement Products to the original Purchaser/Consumer free of charge.
    
   
5. Legal Rights and Limitations of Purchaser/Consumer. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU ALSO MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON ANY DRAW-TITE PRODUCT SHALL BE LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE AT RETAIL TO THE ORIGINAL PURCHASER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
    
   DRAW-TITE SHALL NOT BE LIABLE OR ASSUME RESPONSIBILITY FOR THE LOSS OF THE USE OF ANY VEHICLE, LOSS OF TIME, RENTAL OF VEHI-CLES, LOSS OR DAMAGE TO PERSONAL PROPERTY, EXPENSES SUCH AS GASOLINE, TELEPHONE, LODGING, OR TOWING, OR ANY OTHER INCI-DENTAL OR CONSEQUENTIAL DAMAGES INCURRED AS A RESULT OF THE USE OR OWNERSHIP OF ANY PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE EXCLUSION OR LIMITATION SET FORTH BELOW MAY NOT APPLY TO YOU. REPLACEMENT OF THE PRODUCT IN THE MANNER PROVIDED ABOVE SHALL CONSTITUTE FULFILLMENT OF ALL LIABILITIES OF DRAW-TITE TO THE PURCHASER/CONSUMER WHETHER BASED ON CONTRACT OR OTHERWISE.