Features
- Real Retracting Design: With the real ez glide system the hard tonneau cover opens and closes easily
- Real Solid Aluminum: The 100% aluminum construction makes it tough and the premium textured black powered coated finish makes it look great.
- Real Clamp On Installation System: All models come with the clamp on installation system. The clamp on system allows for a faster installation. No drilling required. Note: some models require 2 small self tapping screws to be installed on the inside of each rail at the front. About a 45 minute installation.
- Real Compact Canister: The hard retracting truck bed cover has a compact canister with rounded bottom for fast water drainage.
- Real Low Profile: The low profile design looks great. Plus it increases your fuel economy and saves you gas.
- Real Self Lube Track: Inside the rails are lines with super high density polyethylene. This is better than teflon as teflon freezes. This doesn't. This stuff allows the cover to glide real ez without grease.
- Real Security: The hard retracting cover is hard and secure. Your gear is safe. There are no visable locks or keyhole. You need to drop the tailgate to un lock the cover. Note: An optional tailgate lock is needed to lock the tailgate. (tailgate locks sold separately)
- Real Season Design: Real superior water resistance. The canister has a rounded bottom desing so water won't pool inside and freeze. The opposing slat design have seals under each make it impossible for water to get through the slats. Water drains down the rails, into the canister and out through tubes. This cover is built to handle all four season.
- Real Compatible: The cover mounts to the inside rail of your pickup so it works with most bed rails, stake pocket tie downs, tailgate guards and under the rail bedliners.
Description
The Real Series Retractor HD tonneau covers. The Retractor HD Retracting truck bed cover is made from premium aluminum with a textured black powder coated finish. The Retractor HD solid metal tonneau covers has a spring loaded retractable design. The hard metal cover easily retracts into the front canister with the real ez glide technology. The Retractor HD tonneau cover can be locked every 12 inches if needed. So you can open or close the Retractor HD hard tonneau cover in seconds. The space saving canister is impact resistant and the cover works with most other truck bed accessories such as bed rails, tie downs and under the rail bedliners. Plus the full metal design makes your gear secure. The Retractor HD truck bed cover easily retract when you need to haul larger items or need fast truck bed access.
Real Series Retractor HD Tonneau Cover Installation
The Real Series Retractor HD Tonneau Cover from RealTruck is an easy at home no drill installation.
Retractor HD Tonneau Cover Customer Reviews
| Customer Rating |
Product |
 |
5/5 for BK-RT-R15202 - Retractor HD Tonneau Cover
Posted By:Karl H. (Schriever, LA) on 02/2010
REPLACING AN OLD VYNAL ROLE UP AND FOUND THIS TO BE THE BEST DESIGN / COST EFFFECTIVE FOR ME. CLEAN DESIGN WITH NO PROTRUSIONS AND SIMPLE LOCK SYSTEM THAT CLEARS MY MONSTER 5TH WHEEL AIR RIDE HITCH. TOOK LONGER TO INSTALL, BUT I AM PICKI ABOUT MY TRUCK AND AM OLD AND WEAK NOW. I USED THIN PLASTIC SHIMMS AROUND THE SIDE RAILS TO EVEN OUT MY BED DESIGN AND KEEP THE RAILES FROM LEANING IN TO THE BED. WISH THIS HAD BEN AVALABLE TO ME IN '96, THEN I WOULD NOT HAVE HAD TO REPLACE IT. THIS TOP WILL LAST ME FOR THE REAST OF MY LIFE....
|
|
5/5 for BK-RT-R15101 - Retractor HD Tonneau Cover
Posted By:Melvin D. (Ludlow, VT) on 12/2009
|
 |
2/5 for BK-RT-R15311 - Retractor HD Tonneau Cover
Posted By:Michael T. (Milton, FL) on 11/2009
Honestly I'm satisfied at this point. Installation is not difficult but the latch system is not what is shown on your web ad[your ad shows a pin latch and this one has a cable pull] and the cannister cover wouldn't seal out anything less than 1/2", the debris brush doesn't come close I can slide my hand under it and there's nothing that can be done without modification. The cover looks great there are some flaws in the finish here and there but i'm pretty picky
|
|
4/5 for BK-RT-R15100 - Retractor HD Tonneau Cover
Posted By:James L. (Sunrise Beach, TX) on 09/2009
Ease of installation was overstated, but only a little. Operation was difficult due to binding. After several iterations at lubrication and adjustment the cover now seems to be appropriately aligned and works very well. Stake pockets are left open and available for use. Tracked MPG for 1200 miles before and 700 miles (so far) after - gained 1.2 mpg from before to after. Overall: Looks like it will do good, but be prepared to tedious installation.
|
|
3/5 for BK-RT-R15106 - Retractor HD Tonneau Cover
Posted By:Grant B. (Ogden, UT) on 08/2009
I like the cover, but it was a real bear to install. The instructions were incomplete or insufficiently detailed enough to make a proper installation. I had to call the manufacturer to get further instructions. The "man" with the knowledge was out sick, but they would have him call me. They didn't! I had to call twice more before I finally reached him. He said I need shims on my rails. Nothing in the instructions about shims. And there wasn't enough shims provided. The clamps did not want to stay in position while they were tightened either. A 25 minute installation took more than 4 hours. I would, probably, buy another one from RealTruck. The price was good and the service was good. The manufacture just needs to be more clear on their instructions.
|
|
5/5 for BK-RT-R15502 - Retractor HD Tonneau Cover
Posted By:Giorgio C. (Kailua, HI) on 08/2009
|
|
4/5 for BK-RT-R15303 - Retractor HD Tonneau Cover
Posted By:Ray H. (Clayton, NC) on 06/2009
Every thing is okay about the top i have. It was easy to put together.If I has to do over Realtruck would be the one. I will be tell all my friends about my service. Thank you.
|
|
5/5 for BK-RT-R15401 - Retractor HD Tonneau Cover
Posted By:William M. (Redington Beach, FL) on 05/2009
Works as advertized, really happy with the way it securly covers tools & equipment in the bed of my truck. Install is pretty simple & straight forward and would not have taken that long, but I had to cut away a section of my bedliner in the front of my truck since the bedliner was curved too much and about 5" from the wall of the truck. Price is great & was $160 less than the rollbak G2 which this actually is. only installed one week ago so can't comment on long term reliability.
|
|
5/5 for BK-RT-R15507 - Retractor HD Tonneau Cover
Posted By:Vincent S. (Coral Springs, FL) on 06/2008
Product arrived on time. All parts were in the two boxes. Had to take off the unirail system that came with the nissan truck. Other than that all went well. Would buy from RealTruck again. Without any hisitation.
Vincent Salimbene
|
|
1/5 for BK-RT-R15505 - Retractor HD Tonneau Cover
Posted By:Jason C. (Miramar) on 03/2008
The product description clearly stated that the stock Utility track system would not need to be removed and I did have to remove it. I've tried to adjust the rails a million times and it still leakd water on the sides where the tracks are. I should have bought a Roll-N-Lock.
|
|
3/5 for BK-RT-R15304 - Retractor HD Tonneau Cover
Posted By:Daniel F L. (Richmond, VA) on 03/2008
Finish is holding up good.Weatherstripping good be a little better design,Don't expect it to be dry as a bone
|
|
3/5 for BK-RT-R15309 - Retractor HD Tonneau Cover
Posted By:Roswald L. (Hinesville, GA) on 03/2008
Loved the simplicity of the installation but the instructions where not necesary in sequence. Good material quality but the rubber piece at the end where the bed cover meets the tail gate is poor quality.
|
|
5/5 for BK-RT-R15305 - Retractor HD Tonneau Cover
Posted By:David H. (Denison, TX) on 03/2008
this is my fifth bed cover to buy and install. all the rest have been of different brands. This cover was by far the easiest to install, and the best quality. I will buy this cover for my next truck and recommend this cover to everyone.
|
Retractor HD Tonneau Cover has an average rating of
4
with 13 reviews.
