How does the Access Roll-up Cover or LiteRider work?
What is the difference between the Access Roll-up Cover
and the LiteRider?
What is the ACCESS Limited Edition?
Why are the ACCESS & LiteRider Roll-up Tonneau
Covers the tightest made?
Will the Access Roll-up Cover or LiteRider keep my pickup
bed dry?
Does the Access or LiteRider Roll-up Cover increase my
gas mileage?
Are the Access Roll-up Cover & LiteRider Lockable?
Will the Access Cover or LiteRider shrink in the cold or
stretch in the heat?
Will the Access Cover or LiteRider work with other
accessories such as bed liners, bed caps, bed rails, toolboxes, and cab
spoilers?
What size toolbox will the Access Toolbox Edition work
with?
How does the Access Cover or LiteRider install?
Can I install my Access Cover or LiteRider?
Can I adjust the tension of the Access Cover or
LiteRider?
How long with the cover material last?
How long will the side hook & loop sealing system
last?
Will the Access Cover or LiteRider work with 5th Wheels?
Access vs. Literider Comparision
How does the SnowSport™ Install to my vehicle?
Is a front receiver hitch needed?
How difficult is it to install the hitch and plow?
Can I install the SnowSport™ Plow myself?
How is the SnowSport™ Plow shipped?
How easy is the SnowSport™ Plow to hook up or un-hook
between jobs?
How do you switch from transporting to plowing or from
plowing to transporting?
How can the SnowSport™ Plow operate without hydraulics?
How well does the rubber cutting edge and box ends hold up?
What is the warranty?
Can I move the SnowSport for one vehicle to another?
Is the SnowSport™ available for my vehicle?
How much does the plow weigh?
How does the bedrug install?
How does the tailgate piece fit/install?
Can the bedrug be washed?
What is the bedrug made of?
How long is the bedrug warranty?
 
What models of tents are available?
What materials are they made of?
How is the truck tent installed?
What is the warranty of the Sportz Truck Tents?
Keyed/Power Tailgate Locks
How difficult is it to install a power tailgate lock?
How difficult is it to install a keyed tailgate lock?
What is the Loadhandler?
How does it work?
How strong do I need to be?
Who is the Loadhandler customer?
Can I install it myself?
What is the drag sheet?
How long will the drag sheet last?
Will it fit my truck?
Will the Superchip void my warranty?
Will the Superchip hurt my engine, transmission, or computer?
How will my fuel economy be affected?
What octane gas should I run?
What type of assurance comes with your chip?
How difficult is the installation process?
Do I need to change anything for the Superchip to work properly?
What if I have or plan future modifications?
What modifications require custom programming?
TonnoCover Gift Cards
Can I buy merchandise on tonnocover.com using my TonnoCover Gift Card?
Where can I use my TonnoCover Gift Card?
Where can I buy TonnoCover Gift Cards?
Can I add a personalized message with my Gift Card Purchase?
How do you ship a TonnoCover Gift Card?
How much do you charge to ship a TonnoCover Gift Card?
How can I add funds to my TonnoCover Gift Card?
In what denominations can TonnoCover Gift Cards be purchased?
What kind of merchandise can I buy with a TonnoCover Gift Card?
How do I check the balance of my TonnoCover Gift Card?
I want to buy a bulk quantity of Gift Cards for my business or organization for incentives or prizes, to whom should I speak?
What should I do if my TonnoCover Gift Card is lost or stolen?
Does my TonnoCover Gift Card have an expiration date?
My TonnoCover Gift Card doesn't seem to be working. Can you help me?
|
How does the Access Roll-up Cover or LiteRider work? |
| |
Simply release the auto-latch and
roll the cover to the front of your pickup. The bars and bows are
attached to the cover and roll up with it. Once the cover is rolled up to the
back of the cab, secure it with the quick release straps. To close the cover,
simply roll it back to the tailgate, over-center the roll-up/tensioning bar
into the strikes and the auto-latch
holds it securely in place. For additional security, push the slide-locks into
place. Then, seal the sides with your hand. |
| |
| What is the difference
between the Access Roll-up Cover and the LiteRider? |
| |
Both covers offer the same great rollup style design.
The LiteRider is our standard model and
the Access Roll-up Cover is our premium
model. The Access Roll-up Cover comes with a thumb dial direct tension
adjustment, super heavy duty cover, and 1 1/2" side sealing system. It is our
best seller. The LiteRider has thumb dial tension adjusters, a Heavy-Duty cover
and a 1" side sealing system. The material is tougher and stronger than any
other cover made. However the Access Cover is even stronger. The Access Roll-up
Cover has been manufactured since 1988 and is "the proven truck cover that
keeps working for you (tm). |
| |
| What is the ACCESS
Limited Edition? |
| |
The Access Limited
is the Access Roll-up Cover with all black bars, bows, and rails. For that
Ultimate Custom Truck Look! |
| |
| Why are the ACCESS
& LiteRider Roll-up Tonneau Covers the tightest made? |
| |
For a few reasons: 1. Angled Roll-up
Bar: The unique roll-up bar over-centers into the strikes, pulling the cover
tight from front to rear. Giving you the tightest soft cover made.
Plus the cover is wrapped around the anodized aluminum roll-up bar for
better styling and a tight seal over the tailgate. 2. Adjustable
Tension: The tension adjusters allow you to fine tune the cover tension with
the turn of a dial. Giving you control over your cover tension, not the
weather. No tools are needed. Just turn the dial to tighten your cover and feel
good knowing you have the tightest cover made |
| |
| Will the Access Roll-up
Cover or LiteRider keep my pickup bed dry? |
|
Our covers are waterproof and our rails come with a
closed cell gasket attached to the sides. However, your tailgate is not sealed
like your doors. We suggest that you purchase the optional
TrailSeal Tailgate Gasket for that. On some pickup models the stake
pockets may need to be covered. |
| |
| Does the Access or
LiteRider Roll-up Cover increase my gas mileage? |
|
With the Access or LiteRider in the closed position, your pickup's
aerodynamics are improved, which results in increased mileage and
handling. |
| |
| Are the Access Roll-up
Cover & LiteRider Lockable? |
|
The Access and LiteRider Roll-up Covers come with slide-locks. The
optional tailgate lock is needed
to lock the tailgate. |
| |
| Will the Access Cover
or LiteRider shrink in the cold or stretch in the heat? |
|
Our material is Flexible at 40 below & is stretch and shrink
resistant. It is tested and proven in all four seasons. |
| |
| Will the Access Cover
or LiteRider work with other accessories such as bed liners, bed caps, bed
rails, toolboxes, and cab spoilers? |
|
Special toolbox Access
Cover models are available for late model full size pickups. The
Access cover or LiteRider have a
Specially Engineered Slanted (angled) Rail Design delivering more
function and style. It is Accessory Friendly- allowing plenty of room
for bed rails, while still allowing you room to seal the cover. Easier Operation-The
slanted design makes opening and closing the cover easier and longer lasting.
The heavy-duty rails are durable and the Sleek Appearance contours to
the design of the truck bed. Plus if you likne accessoris check out the all new CargoBox.
It is designed specifically for pickup trucks with Access or LiteRider Covers. |
| |
| What size toolbox will
the Access Toolbox Edition work with? |
|
This cover will fit most 20"-21" over-the-rail style toolboxes and
comes with all the features of the Access Roll-up Cover. Each kit includes a
sealing header bar adaptable for most 20"-21" over-the-rail
toolboxes. |
| |
| How does the Access
Cover or LiteRider install? |
|
They install with clamps. A
professional installer can install our covers in about 10 minutes. However,
plan about 10-45 minutes at home depending on your experience and model. The
units are package for a fast easy at home installation with clamps specifically
designed for the covers and your pickup.
|
| |
| Can I install my
Access Cover or LiteRider? |
|
Yes, the instructions are clear-cut. If you do need
assistance, call 1-800-233-4655 between 9-5pm CST. Our customers overwhelmingly
say "it was simple and easy to install". |
|
|
| Can I adjust the
tension of the Access Cover or LiteRider? |
|
|
YES, The direct dial tension
adjusters allow you to fine tune the cover tension with the turn of a dial.
Giving you control over your cover tension, not the weather. No tools are
needed. Plus there are no moving parts to fail or springs to corrode. |
|
|
| How long with the
cover material last? |
|
|
The life expectancy is determined by how well you take
care of it. The Access Cover material heavy-duty and double coated. It is the
most expensive. It is tougher, more durable and proven than any other cover.
The LiteRider Cover material is tough as well. The LiteRider material is still
tough. Just note as tought as the Access material. However, how you care for
the cover, will determine just how long it will last. We suggest that you use
PPC Formula 2 Cleaner/Protectant to increase the longevity of your
cover. |
|
|
| How long will the side
hook & loop sealing system last? |
|
|
It has been tested and proven to provide years of
service in all four seasons. It is tested - proven - and guaranteed. |
|
|
| Will the Access Cover
or LiteRider work with 5th Wheels? |
|
|
YES. Simply roll up the cover to the
front of your truck and secure it with the quick release straps.
|
|
|
| How does the SnowSport™
Install to my vehicle? |
|
The SnowSport™ personal utility plow hooks up the the front receiver (2" square
tube) hitch just like hooking up a receiver on a hitch used at the rear of a
vehicle for towing trailers.
|
| Is a front receiver
hitch needed? |
|
Yes, and it comes with the plow package along with instructions to install it.
|
| How difficult is it to
install the hitch and plow? |
|
The front end hitches are designed to bolt in place on most models -
occasionally, certain models my require drilling. The instructions are clear
cut. The front receiver hitch is mounted to the vehicle and the push frame is
plugged into the front recevier hitch. The plow simply hangs on the push frame.
|
| Can I install the
SnowSport™ Plow myself? |
|
YES, the instructions are clear cut. If you do need assistance, call
1-800-233-4655 between 9-5pm CST. Our customers overwhelmingly say "it was
simple and easy to install". The front hitch varies from vehicle to vehicle.
Plan about 30 minutes to 1 hour depending on your level of experience. The plow
is attached in minutes by pluging in the push frame and attaching the plow to
it.
|
| How is the SnowSport™
Plow shipped? |
|
It is shipped via common carrier in three boxes. The plow box, push frame box,
and receiver hitch box.
|
| How easy is the
SnowSport™ Plow to hook-up or un-hook between jobs? |
|
It's very easy. Just insert the push frame into the front receiver hitch and
secure with pin. Then hang the blade one end at a time onto the push frame (can
be done in less than a minute). Un hooking is just a easy.
|
| How do you switch from
transporting to plowing or from plowing to transporting? |
|
The operator must manually unhook the plow and lower it for plowing. For
transporting simply lift the blade, one side at a time, onto the push frame.
|
| How can the SnowSport™
Plow operate without hydraulics? |
|
The blade is secured by the push frame. As you push the snow, the blade travels
up and down as needed by gravity. The rubber cutting edge is designed to cut
through the snow but pass over the harder ground surfaces below and be gentle
on grass. When you back up, the blade automatically lays back, skimming over
the surface. Then you drive forward and the blade re-engages for plowing.
|
| How well does the rubber
cutting edge and box ends hold up? |
|
The rubber cutting edge is 1" think 6" high - made of a hard rubber compound.
This has been tested and proven to provide years of service. It can be replaced
relatively inexpensively.
|
| What is the warranty? |
|
The plow has a 1-year limited warranty. See the owners manual for details.
|
| Can I move the
SnowSport from one vehicle to another? |
|
Yes, the plow can be easily transfered to another vehicle, all you need is a
front receiver hitch.
|
| Is the SnowSport™
available for my vehicle? |
|
It is available for most late model pickups and SUV's.
Click here for a listing of vehicles it is available for.
|
| How much does the plow
weigh? |
|
The aluminum blade is about 110 lbs. The complete kit with blade, push frame,
and hitch is about 225 lbs.
|
|
| How does the bedrug
install? |
|
The sides zip together to the floor and the complete unit attaches to the floor
with hook and loop fasteners (similar to Velcro). Plan about 20-30 minutes.
|
| How does the tailgate
piece fit/install? |
|
The tailgate piece is attached to the floor of the bedrug and extends to the
top of the tailgate and attaches with hook and loop fasteners.
|
| Can the bedrug be washed? |
|
YES. Dirt and spills can be cleaned with soap and water from a garden hose or
high pressure washer. Actually, Gasoline, acids, solvents, chemical compounds,
and any petroleum product will not damage the carpet or foam. The closed-cell
cross linked polyethylene foam can not soak up ANY liquid. The BedRug® foam
will not dry out, crumble, dissolve, or dissipate in any way.
|
| What is the bedrug made
of? |
|
Polyester carpet and molded closed-cell polyethylene foam.
|
| How long is the bedrug
warranty? |
|
It has a limited life-time warranty for the life of the original truck it was
installed in to the original owner.
|
|
| What models of tents are
available? |
|
Tents are not available for all trucks, check
order page for current models available.
A. The Sportz Truck Tent is available
in the most sizes.
B. The Camo pattern model is only
available in 3 sizes.
C. The New Sportz Truck Tent II Tailgate Tent
is available in more and more sizes. If your model is not listed, keep checking
back.
|
| What materials are they
made of? |
|
Floor: 12x12 woven polyethylene, water resistant coating on both sides
Walls/Roof: Taffeta Nylon, fire retardant, water resistant
Mesh: No-See-Um, 100% polyester, fire retardant
Rain Fly: Nylon Taffeta
Poles: Fiberglass connected with shock cording
Weight Range: 10-12-lbs.
|
| How is the truck tent
installed? |
|
Simply spread the tent out inside the bed of the truck. Identify the 9 securing
straps. (3 on back of box, 3 on left and right side of tent) and then secure 3
rear straps to bumper. Then, Secure all six straps on the right and left hand
side of truck by hooking two under the truck body and one in the wheel well.
Tent sides will over lap perimeter of truck bed. Erect all poles to full
length. Insert first 3 poles through sleeves, starting with the longest two
corner to corner, then the side to side. Begin by each inserting pole into the
sleeve end closest to truck bed, feeding pole towards the truck cab, making
sure to insert pole into corresponding sleeve at mid point. Once the poles are
inserted through the sleeves, insert one end of the pole into one of the
pockets at the side strap securing points. Feed poles towards secured end from
the unsecured end and insert pole into securing pocket, this will cause the
pole to arch and begin erecting the tent. Once all 3 poles have been secured in
their opposing pockets, open door to insert the last pole (black pole). Insert
pole between blue and gray portion above tent door. Locate hollow grommet at
top of tent. Feed black pole through grommet, bringing it inside the tent.
Continue feeding pole along tent seam until you can insert it into the pole
pocket. Insert other end of pole into pocket at the tip of gray door overhang
portion. Secure velcro centering straps to black pole. And you are done (click
here to view instructions) For the sportz truck tent II the same
instructions apply except your tent extends onto the tailgate and you also
receive a 6’ canopy that is attached to the tent itself and comes with 2 poles.
|
| What is the warranty of
the Sportz Truck Tents? |
|
1 year manufacturers’ warranty.
|
Keyed/Powered Tailgate Locks
|
| How difficult is it to
install a power tailgate lock? |
|
Plan about 45-60 minutes depending on your level of technical skill. Most power
locks install into the rear of the tailgate and the wire runs under the vehicle
and quick connects into the wiring for the power door locks. No cutting is
required. However, this is a difficult install. For more info more call the
manufacturer directly at 800-342-5911 for more detailed answers to your
questions.
|
| How difficult is it to
install a keyed tailgate lock? |
|
Most models are very easy. You simply remove the top rear bolt on the inside of
the tailgate, lift the tailgate up and place the lock underneath the handle and
re-insert the bolt you remove or a non-reversable screw (provide). And you're
done. The most difficult keyed tailgate lock is the PL2300.
|
|
| What is the Loadhandler? |
|
Loadhandler is the most economical pickup truck unloader available.
|
| How does it work? |
|
You wind a handle and the load comes off. In engineering terms, it's a
combination of high mechanical advantage and low friction.
|
| How strong do I need to
be? |
|
If you can lift 70 lbs. you can unload 1.5 tons!
|
| Who is the Loadhandler
customer? |
|
Landscapers, gardeners, farmers, do-it yourselfers, camp-grounds, utilities or
anyone who owns a pickup truck.
|
| Can I install it myself? |
|
Yes. The first "fitting" will take 3 to 5 minutes. After that it
takes about 30 seconds to install or detach.
|
| What is the drag sheet? |
|
The drag sheet is a close woven polyolefin fibre with a tensile strength of 10
tons across its width.
|
| How long will the drag
sheet last? |
|
That depends on how often it is used and what loads it moves. With care it
should last many years.
|
| Will it fit my truck? |
|
Yes, and it is available in 2,000 and 3,000 pound models.
|
|
| Will the Superchip void my
warranty?
|
| |
No. It is illegal for the vehicle manufacturer to void your
warranty just because aftermarket parts are installed on your vehicle. You are
protected by the Magnuson-Moss warranty, Federal Trade Commission Improvement
Act.
|
| Will the Superchip hurt my
engine, transmission, or computer?
|
| |
No. How well you take care of your truck and handle the extra
horsepower determines longevity. Don’t go spinning wheels and racing if
durability is an issue. Simple towing and traveling will do no harm.
|
| How will my fuel economy be
affected?
|
| |
Fuel mileage depends on HP increase and driving habits. Typically,
a 1 to 2 mpg increase is common. For the power stroke diesel, we offer a chip
that will give 2 to 5 more mpg in addition to increasing HP.
|
| What octane gas should I
run?
|
| |
We suggest that run use an octane rating of 91 or higher. You will
get more bang for your buck if you do. You can get away with using 89 octane if
you prefer. Even 87 octane in some cases but we don’t suggest 87. If your
valves ping, (sounds like something is rattling loose) switch up to a higher
octane.
|
| What type of assurance
comes with your chip?
|
| |
We offer a 30 day money back customer satisfaction guarantee as
well as a lifetime warranty. We only sell the absolute best. Ask anyone who has
one.
|
| How difficult is the
installation process?
|
| |
The instructions are clear cut. The Micro Tuner Programmer takes
about 4-15 minutes depending on the model. A phone number is provided for after
hour tech support. (note: Dodge Ram D-Box takes about 15 minutes to install.) |
| Do I need to change
anything for the Superchip to work properly?
|
| |
There is no need to add or change anything with the gas-operated
engines. The PowerStroke how ever needs no modifications with HP increases of
60HP or less. More HP requires the turbo down pipe to be changed to a 3 ˝" or
larger. Adding a free flowing exhaust and air filter will only help improve
what you already have. It doesn’t matter which vehicle you own.
|
| What if I have or plan
future modifications?
|
| |
In most cases, superchips can customize your superchip to accommodate modifications you have done to your vehicle.
|
| What modifications require
custom programming?
|
| |
Modifications that benefit from custom programming include,
Headers, An H or X pipe, high performance cam, larger mass air flow meter,
larger flow fuel injectors, etc. Modifications not requiring custom programming
but will improve your vehicles performance including a K&N, AFE, Airaid, or
DJ Motorsports air filter and air intake system, a reduced backpressure exhaust
system or muffler, a new style of spark plugs, hotter thermostat, etc. |
TonnoCover Gift Card FAQ |
| Can I buy merchandise on tonnocover.com using my TonnoCover Gift Card? |
| |
Yes. Simply place the items in your shopping cart and proceed through the checkout process.
When you are prompted to enter your payment information, you will have an option to pay with
the TonnoCover Gift Card. You may also enter the Gift Card number on our mail in order
form or call us at 701-253-5907 or 1-888-263-7491 to place an order.
|
| Where can I use my TonnoCover Gift Card? |
| |
TonnoCover Gift Cards can be used for purchase at TonnoCover.Com. Purchases may be made online,
with a mail in order form or over the phone by calling 701-253-5907 or 1-888-263-7491.
|
| Where can I buy TonnoCover Gift Cards? |
| |
TonnoCover Gift Cards can be purchased online,
from our mail in order form in our printed mail order catalog or by calling us at 701-253-5907
or 1-888-263-7491.
|
| Can I add a personalized message with my Gift Card Purchase? |
| |
Yes. When you purchase a Gift Card, whether online, through our mail in order form or over the
phone, you will have a chance to add a personalized note with your gift when you checkout.
|
| How do you ship a TonnoCover Gift Card? |
| |
Gift Cards are shipped Via UPS, Fed Ex, Speedee, Airborne, or USPS with signature receipt
required. We select the best shipper based on where it is being shipped to and what shipping
method you have requested. The Gift Card is shipped in a shipping envelope. Inside the shipping
envelope is a Gift Card envelope with a greeting card inside with your personalized message
(if you provided one) and the Gift Card.
|
| How much do you charge to ship a TonnoCover Gift Card? |
| |
You get Free Ground Shipping. Need
your Gift Card shipped faster? Your Gift Card can be shipped out via 3-Day, 2-Day or Next Day Air
shipping for an additional fee. Pricing is according to published rates. You may call us for
3-day, 2-Day or next day air rates or add a Gift Card to the online shopping cart and select
which method you would like for shipping. The rates will display in the shopping cart.
|
| How can I add funds to my TonnoCover Gift Card? |
| |
Please contact TonnoCover by calling 701-253-5907 or 1-888-263-7491. Let the customer service
agent know how much money you would like to add to your TonnoCover Gift Card ($15.00 to
$1,000.00). Then pay for the transaction with a credit card.
|
| In what denominations can TonnoCover Gift Cards be purchased? |
| |
TonnoCover Gift Cards may be purchased in whole dollar amounts between $15.00 and $1,000.00.
|
| What kind of merchandise can I buy with a TonnoCover Gift Card? |
| |
You can use your TonnoCover Gift Card to buy any products we sell except a Gift Card.
|
| How do I check the balance of my TonnoCover Gift Card? |
| |
You can check your balance online by visiting our TonnoCover
Gift Card Balance Page. Or by calling
us at 701-253-5907 or 1-888-263-7491. Must have Gift Card number available.
|
| I want to buy a bulk quantity of Gift Cards for my business or organization for incentives
or prizes, to whom should I speak? |
| |
Please call our Corporate Wholesale Sales Department at 1-888-263-7491 or send them an e-mail
to wholesale@tonnocover.com.
|
| What should I do if my TonnoCover Gift Card is lost or stolen? |
| |
Protect your Gift Card like cash. If a Gift Card is lost or stolen, only the balance remaining
on the Gift Card at the time an original receipt is presented will be reissued. Please contact
our Customer Service team for assistance.
Sorry, we cannot be responsible for funds used without your knowledge or issue a replacement Gift
Card without the original receipt.
|
| Does my TonnoCover Gift Card have an expiration date? |
| |
No. TonnoCover Gift Cards do not expire.
|
| My TonnoCover Gift Card doesn't seem to be working. Can you help me? |
| |
Yes, please call our Customer Service team at 1-888-263-7491 for assistance or visit our
Customer Service department online.
|
Catalogs
