• Same Day Shipping:  Order by 1pm CST and your plow will ship today.
• Hitch Mounted SnowPlows:  The SnowSport HD plow is very simple to install and easily attaches to a front or rear 2" receiver hitch.  Note:  Front 2" Hitch  or Rear 2" Receiver Hitch sold separately.  For 2" front mount receiver hitches we recommend ordering the Snowsport 2" Front Mount Receiver Hitch.  Plow blade and push frame assemble is about 30 minutes.
• Works on Many Vehicles:  The Snowsport Plow will work on virtually any Compact or Full Size SUV or Pickup Truck.  Perfect for home owners, contractors, business owners and farmers.  Snow plowing has never been easier or more affordable.
• Easy to Use:  Just attached the push frame to the hitch and put the blade in the transport position on the push frame.  Lower the blade with you are ready to plow.  Plow snow from the comfort of your cab.  Just drive forward to plow and let the blade do the work with the turf friendly heavy duty rubber cutting edge.  Then Just Back Up with your vehicle in reverse the blade follows leaving the snow right where you piled it.  Drive forward again to plow some more.
• Attractive Light Weight Yet Heavy-Duty Extruded Aluminum Blade:  Turf friendly heavy-duty rubber cutting edge  and rubber box ends work great on cement, black top, gravel and won't damage grass surfaces.  
• 3 Position Blade:  The angling interceptor comes standard.   The angling interceptor allows you to plow straight or to angle the blade for plowing long roads or drive ways.
• Kit Includes:  Snow sport plow kit comes complete with Blade Assembly, Push Frame and Angling Interceptor.  It is very easy to maintain as it has No electrical or hydraulic components to freeze, malfunction or wear out.
• Easy Hook Up:  The Fast Attach Push Frame attached to a 2" receiver hitch and secure with hitch pin. Then hang the snowsport plow blade one end at a time onto the push frame (can be done in less than a minute).  To plow just lower the blade. To transport the plow just hang the plow blade on the top of the push frame.  To remove completely, un hooking is just a easy.  You can also leave the blade in the transport position on the push frame all winter long.
• Dual Position Blade Markers:  Standard equipment on SnowSport HD for easy snow plow operations.
• Low Profile Design:  SnowSport Personal Utility Plow allows full view of your vehicles' headlights while transporting or plowing.
• Heavy-Duty Rubber Box Ends:  Gives the plow a larger capacity, so you can move lots of snow quickly and easily.
•  For more information or a Free Product Video Call 1-877-216-5446 or 701-253-5906
• Also available SnowSport 180 Plows and SnowSport ATV Plows

Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

Snow Sport Snow Plow Features
	GM Product of the Year Agri-Cover, Inc the manufacturer of the ACCESS® Roll-up Cover and SNOWSPORT® Personal Utility Plow is proud to receive the prestigious "GM BEST NEW PRODUCT OF THE YEAR" award for SNOWSPORT® at the 2003 SEMA convention
	Angling Interceptor Close Up The snowsport plow can be ordered with a Straight Interceptor or an Angling Interceptor. The Angling Interceptor comes in handly for long roads or drive ways.
	Drive To Re-engage Plow Back up & Drive to Re-engage Plow: By backing up, the blade lays back skimming over the surface. Then drive forward, and the blade automatically re-engages for plowing.
	Pushing Snow is Easy Just Drive Forward and let the plow blade do the work. Then by backing up, the blade lays back skimming over the surface. Then drive forward, and the blade automatically re-engages for plowing.
	Rear Hitch Mounted The snowport can be mounted on the rear. A 2" rear hitch is needed.
	Blade Markers In Use Dual position blade markers are standard equipment for easy snow plow operations
	Built Tough - Easy to Use Anodized 6063-T6 Aluminum extruded blade. 7 feet wide blade handles even the toughest jobs.
	HD Rubber Box Ends The snowsport snowplow rubber box ends hold a large amount of snow and make snow plowing faster and more efficient.
	HD Rubber Cutting Edge Turf friendly heavy-duty rubber cutting edge and rubber box ends work great on cement, black top, gravel and won't damage grass surfaces.
	Large Snow Capacity The 7' blade comes with heavy duty rubber box ends so you can push lots of snow.
	Lift Handles on Each Side Comfortable lift handles are located on each side of the snowsport plow blade
	Low Profile Design The low profile design of SnowSport Personal Utility Plow allows full view of your vehicles' headlights while transporting or plowing.
	No Interference w/Headlights The low profile design of SnowSport Personal Utility Plow allows full view of your vehicles' headlights while transporting or plowing
	Plow Drawing Detail The snowsport is very easy to assemble
	Plow Kit w/ Hitch Snowsport Plow Blade, Push Frame & Receiver Hitch (Note: Hitch sold separately)
	Push Frame Fast attach push frame slides into 2" front or rear receiver hitch and secures with hitch pin.
	Store w/Quick Pins to Transport The SnowSport plow blade is easily lifted up and secured with snap pins on push frame for transporting.
	Works Great on Grass Plow blade is guided by push frame that allows it to slide up and down with the grade of the terrain. The thick rubber cutting edge moves snow but flexes over stationary objects.

1. How does the SnowSport Install to my vehicle?  The SnowSport Utility Snow Plow attaches to a 2" front or rear receiver hitch.  The push frame for the plow just hooks up like a ball mount.  Note the hitch needs to be from 9" to 16" off the ground for ideal operation.
2. Is a front or rear 2" x 2" receiver hitch needed?  Yes:  For 2" Front Receiver Hitchs we suggest you order the SnowSport Brand 2" Front Receiver Hitches.  (Note: for Jeep & Ford F250+ SuperDuty applications, if you want to use a front mount - the SnowSport brand is required).  For 2" Rear Receiver Hitchs, any 2" receiver hitch will work provided it is between 9" to 16" off of the ground.
3. How difficult is it to assemble and install the snowsport snow plow?  The Snowsport Blade and Push Frame are easy to assemble.  Plan about 30-45 minutes depending on your mechanical skill. 
4. How difficult is it to install a front receiver hitch mount?  The front end hitches are designed to bolt in place on most models - occasionally, certain models my require drilling. The instructions are clear cut. The front receiver hitch is mounted to the vehicle and the push frame is plugged into the front recevier hitch. The plow simply hangs on the push frame.
5. Can I install the SnowSport Plow myself?  YES, the instructions are clear cut. If you do need assistance, call 1-877-216-5446 or 701-253-5906. Our customers overwhelmingly say "it was simple and easy to install". The front hitch varies from vehicle to vehicle.
6. How is the SnowSport Plow shipped?  It is shipped via UPS/ Fed Ex Over Size 3 and sometimes it is also shipped via Common Carrier  (Truck Freight)  The blade is in one box, the push frame is in one box, and the angling interceptor is in another box.  We select the best shipper possible depending on where you live and from which warehouse the Snowsport ships from.
7. How easy is the SnowSport Plow to hook-up or un-hook between jobs?  It's very easy. Just insert the push frame into the front receiver hitch and secure with pin. Then hang the blade one end at a time onto the push frame (can be done in less than a minute). Un hooking is just a easy.  You can also leave the blade in the transport position on the push frame all winter long.
8. How do you switch from transporting to plowing or from plowing to transporting?  The operator must manually unhook the plow and lower it for plowing. For transporting simply lift the blade, one side at a time, onto the push frame.  You can also leave the blade in the transport position on the push frame all winter long.
9. How can the SnowSport Plow operate without hydraulics?  The blade is secured by the push frame. As you push the snow, the blade travels up and down as needed by gravity pushing the snow with the rubber cutting edge and aluminum blade. The rubber cutting edge is designed to cut through the snow but pass over the harder ground surfaces below and be gentle on grass. When you back up, the blade automatically lays back, skimming over the surface. Then you drive forward and the blade re-engages for plowing.
10. How well does the rubber cutting edge and box ends hold up?  The rubber cutting edge is 1" thick 6" high - made of a hard rubber compound. This has been tested and proven to provide years of service. It can be replaced relatively inexpensively.
11. What is the warranty?  The plow has a 3-year limited warranty. See the owners manual for details.
12. Can I move the SnowSport from one vehicle to another?  Yes, the plow can be easily transfered to another vehicle, all you need is a front or rear receiver hitch installed on that vehicle.
13. How do I know if the Snowsport Plow will work for my vehicle?  The Snowsport Plow will work on virtually any compact or full size SUV or Pickup.  All you need is a front or rear 2" receiver hitch.  Please note we recommend for the front hitch you use the Snowsport Brand.  If a front hitch is not available in the Snowsport Brand Front Receiver Hitch you can use a Rear 2" Hitch or Have a Hitch Shop Build you one.  The 2" hitch just needs to be between 9" to 16" off the ground.
14. How much does the plow weigh?  The Aluminum blade is about 100 lbs. the Push Frame is about 65lbs and the Interceptor is:  20lbs Straight Interceptor &  35lbs for Angling Interceptor.  

Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

• Anodized 6063-T6 Aluminum Extruded Blade: Attractive heavy-duty and light weight clear anodized aluminum blade
• Low profile plow blade. 7' wide x 18" high x 3" thick:  No lights needed or head light modification required for blade when plowing or in transport position.
• 3 Position Angling Interceptor:  Adjust the plow for straight, right or left angles.
• Heavy Duty 1" thick Rubber Cutting Edge and 1" thick rubber box ends: Turf friendly heavy-duty rubber cutting edge. Works great on cement, black top, gravel and won't damage grass surfaces
• Plow Push Frame hooks into 2 inch Front or Rear Receiver Hitch.  Note: Jeep & Ford F250+ SuperDuty Mounts must be Snowsport Brand Mounts for the Push Frame to work.
• Blade Weight: 100lbs Approx. Push Frame Weight: 65lbs Approx
• Note: If there is no front mount receiver hitch for your vehicle or if you prefer you can use the SnowSport snowplow with a 2" rear receiver hitch.
• Easy to Maintain - no electrical or hydraulic components to freeze, malfunction, or wear out
• Easy to Store - in between jobs or during off season - lightweight enough for easy one person handling.
• When not in use:  The snowsport blade hangs easily on the push frame to transport.

Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

The sport sport plow can be assembled in about 30-45 minutes.  Below you can view the owners and installation manual.  For installation questions, please call Monday to Saturday 1-877-216-5446 or 701-253-5906.  or email cs@realtruck.com 
Note:  2" Front or Receiver Receiver Hitch requires additional installation time.  Also can view the feature images tab for pictures of the installation.

	Install 1 - The Kit Each kit comes with SnowSport snowplow blade and push frame.,Note: 2 inch front or rear receiver hitch (mount) is sold separately. Assemble the blade and pushframe.
	Install 2a - Mount Hitch Mount the front receiver hitch to the front of the vehicle. Each mount kit is vehicle specific.
	Install 2b - Front Hitch Installed Installation takes between 30 minute and 1 hour depending on your technical skill and the specific front hitch.
	Install 3a - Attach PushFrame Slide the fast attach push frame into a 2" front or rear receiver hitch. Hitch needs to be between 9" and 16" off the ground.
	Install 3b - Fasten Hitch Pin Secure the push frame with the hitch pin.
	Install 4a - Attach Blade 1 Once you have secured the push frame you are ready to attach the SnowSport Plow
	Install 4b - Attach Blade 2 Simply lift one end of the blade at a time onto the holders and secure with snap pins.
	Install 5 - You`re Done You`re done! Enjoy plowing.

Note: Adobe Reader is required to view PDF documents: Download Adobe Reader

	1. Just Drive Forward Remember, when the snowsport plow you are not bothered by controls in the cab
	2. Let the Blade do the work It will follow up and down the terrain while you drive. The blade has been specifically designed to roll the snow up and forward to maximize capacity.
	3. Stiff Rubber Cutting Edge The heavy duty rubber cutting edge is rigid yet flexible, mike it turf friendly
	4. When Ready Just Back Up With your vehicle in reverse the blade follows leaving the snow right where you piled it.
	Operation Step 1: Lower It Lift one end of the blade at a time and lower over push frame.
	Operation Step 2: Plow It Just drive and let the plow blade do the work
	Operation Step 3: Raise It When completely done plowing, just lift one end of the blade at a time into the holders on top of the push frame which secure blade with quick pins. The you can transport to the next location.

--Please Choose A Video Below-- SnowSport HD Snow Plow Video (Large) (7,092KB)SnowSport HD Snow Plow Video (Medium) (4,010KB)SnowSport HD Snow Plow Video (Small) (2,607KB)SnowSport ATV Snow Plow Video (Large) (6,084KB)SnowSport ATV Snow Plow Video (Medium) (4,178KB)SnowSport ATV Snow Plow Video (Small) (2,706KB)

SNOWSPORT PLOW MANUFACTURER’S LIMITED WARRANTY
Agri-Cover, Inc. extends the following limited warranty on its SNOWSPORT Plow to the original retail purchaser:  Agri-Cover, Inc. warrants its SNOWSPORT Plow to be free from defects in material and workmanship  under normal use for Three (3) years from date of purchase.  ANY IMPLIED WARRANTY APPLICABLE TO THE SNOWSPORT PERSONAL UTILITY PLOW IS LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF PURCHASE. Agri-Cover’s sole obligation under this warranty or any implied warranty is limited to the repair or replacement at its option, of defective parts only. No labor or service allowance is given or implied. IN NO EVENT SHALL AGRI-COVER, INC. BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or exclusions of incidental or consequential damages, so the above limitations and exclusions may not apply to you.  To obtain part replacements under this warranty, contact the Customer Service Department of Agri-Cover, Inc. at the address shown below. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective. This warranty does not cover any failure due to abuse, misuse, alteration, neglect, improper assembly or installation, or improper maintenance.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Agri-Cover, Inc.
Customer Service Dept.
Hwy. 281 N., PO Box 508
Jamestown, ND 58402
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader