04513

Keeper Over the Wheel Tie Down Straps are manufactured from a Hi Test Webbing that assures the safest, most abrasion resistant tie down available.
These tie downs are designed to secure a wheeled vehicle for Safe Transport.
They are available in Two Different Types; the over the wheel tie down straps 5-1/2' x 2" with Flat Hook and a 6,000 lbs break strength which is designed for R.V. Dollies and the over the wheel Ratchet Tie Down Straps 5-1/2' x 1-3/4" with Flat Snap Hooks or 5-1/2" x 2" with Twisted Snap Hooks and both have a 6,000 lbs break strength.
The over the wheel ratchet tie down straps are availble in 2 Sizes: Fits up to 13" Rims and 6" to 9" Tread and Fits 15" to 20" Rims with 13" to 22" Tread

Tie Down Strap Features
	Over The Wheel Ratchet Style Over the wheel ratchet tie down strap 5-1/2' x 1-3/4" or 2" with 6,000 lb break strength. These Feature Flat Snap Hooks and come in 2 sizes. A. Fits up to 13" Rims and 6" to 9" Tread. B. Fits 15" to 20" Rims with 13" to 22" Tread
	Designed for R.V. Dollies Over the wheel tie down 5- 1/2' x 2" with 6,000 lb break strength which is designed for RV Dollies
	Hi Test Webbing Keeper is committed to providing high quality, long lasting, value driven products. Therefore, we design products with webbing that exceeds the demands of each specific application. Keeper introduced Hi-Test™ webbing to the tie-down market many years ago, using three layers of high tenacity yarn. The face, back and edge layers protect the webbing from abrasion and weather. The center, or warp yarns, provide the strength. All Keeper webbing meets appropriate abrasion capacity requirements so you and your customers are assured of longer lasting products.
	Web Strap Rating The number of strips help tell the rating. 1 Red Stripe = 5,000lb per inch width 2" webbing = 10,000 rated webbing. 2 Red Stripes = 6,000lb per inch width 2" webbing = 12,000lb rated webbing. THE STRIPING SYSTEM IS A WEBBING INDUSTRY STANDARD
	Web Break Strength Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. e.g. Keeper P/N 04622 the failure occurs in excess 0f 10,000 lbs. Be sure to read about our PRODUCT BREAK STRENGTH so you can choose the right Keeper product for your application. Located on FAQ Tab

Keeper Hi-Test Webbing: The heart of a tie-down and tow strap is its webbing. The webbing design must be specific to the job. For example, the webbing used to lash a kayak to an automobile roof rack requires a different break strength, abrasion resistance, and weave pattern than a heavy duty ATV or motorcycle tie-down. Keeper is committed to providing high quality, long lasting, value driven products. Therefore, we design products with webbing that exceeds the demands of each specific application. Keeper introduced Hi-Test™ webbing to the tie-down market many years ago, using three layers of high tenacity yarn. The face, back and edge layers protect the webbing from abrasion and weather. The center, or warp yarns, provide the strength. All Keeper webbing meets appropriate abrasion capacity requirements so you and your customers are assured of longer lasting products.

Componet Capacity	The strength of each component of an assembly. e.g. Keeper P/N 04622, the ratchet begins to fail at 13,000 lbs., the hooks began to fail at 10,000 lbs., and the webbing breaks in excess of 12,000 lbs.


Rated Capacity	Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. e.g. Keeper P/N 04622 the failure occurs in excess 0f 10,000 lbs.


Working Load Limited	The maximum weight of a load a tie-down should be subjected to during normal use. To assist the consumer in making the proper
	tie-down choice for the job, Keeper, the Web Sling Association
	and the Federal D.O.T. require the Working Load Limit to be
	1/3 of the Rated Capacity. e.g. in Keeper P/N 04622 the working load limit is 3,333 lbs.


	DON'T BE FOOLED!

The Webbing Makes a Difference	Sewing Efficiency - As webbing is sewn it is weakened where it is pierced by the needle, reducing its strength by 10-20%.

	D.O.T. and Web Sling Association require each tie-down manufacturer to certify the Rated Capacity (Break Strength) and Working Load Limit of each product by attaching a tag or stencil to the product.

	To obtain the full 10,000 lbs. capacity for a 2" x 27' tie-down, "2 Stripe" (12,000 lbs. break strength) webbing must be used. "1 Stripe" webbing would only yield a capacity of 8,000 - 9,000 lbs. because of the sewing efficiency.

Sizes Include:

5-1/2' x 2" w/ Flat Hook 6,000 lbs Designed for R.V. Dollies

5-1/2' x 1-3/4" w/ Ratchet w/ Flat Snap Hooks 6,000 lbs Fits up to 13" Rims and 6" to 9" Tread

5-1/2' x 2" Ratchet w/ Twisted Snap Hooks 6,000 lbs Fits 15" to 20" Rims with 13" to 22" Tread

Working Load Limit

The maximum cargo weight a tie-down can safely handle and still accommodate unexpected forces caused by speed, road conditions or emergencies. The industry standard for Working Load Limit is 1/3 the break strength of the tie down assembly.

Keeper Over the Wheel Tie Down Straps Customer Reviews

Customer Rating

Product

KE-04512 - Keeper Over the Wheel Nylon Tie Down Strap

Posted By: Robert V. (Asheboro, NC) on 11/2008

Although the over the wheel straps I ordered and recieved wer not what I expected,I have found out that they will do the job.I was looking for straps that I was used to using.These are less cumberson and a lot easyier to use.They take up less storage space and are well made.I was going to return them,until I found out they would do the job well.

Keeper Over the Wheel Nylon Tie Down Strap

Ordering

Features

Feature Images

FAQ

Specs

Reviews

Keeper Over the Wheel Tie Down Straps Customer Reviews