Home > Exterior Accessories > Grille Guards & Push Bars > Bumpers > Rugged Ridge Jeep Dual Tube Bumpers
Rugged Ridge Jeep Dual Tube Bumpers |
 |
|
|
Rugged Ridge Jeep Tube Bumpers are constructed of only the finest materials available and finished like no other tubular product. Rugged Ridge bumpers are designed for your Jeep Cherokee, Wrangler and CJ and are designed to last. All painted Rugged Ridge products are “E-Coated” to ensure a no rust finish. This special process provides an electrostatic applied under coating that seals the raw steel. By having this exclusive undercoating, Rugged Ridge Bumpers can take small rock chips and still maintain their rust protection. All Rugged Ridge Front and Rear Bumpers feature smooth ground welds for an unbelievable look and finish for you Jeep. This exclusive smooth grind process virtually eliminates small weld pockets that never seem to get full paint coverage and tend to rust over time. Also, all Rugged Ridge Jeep Bumpers feature welded end caps rather than plastic end caps, eliminating the days of replacing lost caps. Front bumpers feature an enlarged opening for greater air flow and a clean off road look. Each front bumper has two welded light tabs for easy mounting of off-road lighting. Need to mount a winch on your Jeep? The winch mount version of the Rugged Ridge Front Tube Bumper features a special winch cut out to clear the roller fairlead (winch plate not included). The Rear Tube Bumpers feature a Rugged Ridge exclusive, 17" rear opening that allows up to 31" tires to be mounted on the factory spare tire carrier. Also available for the Rugged Ridge Rear Tube bumper is an optional frame mounted hitch with 2" reciever.
- Factory Fit: Rugged Ridge engineers their products to offer a truely customized, factory fit.
- E-Coated: Rugged Ridge Jeep Tube Bumpers are E-Coated to ensure a 100% rust free finish. The electrostatic undercoating seals the raw steel and can prevent rust in spots where rock chips had previously left the metal exposed.
- Welded Caps: Rugged Ridge Tube Bumpers use only fully welded end caps. Welded end caps provide a tight seal and are 100% waterproof. Competitor's plastic end caps do not provide a water tight seal and are a hassle to replace when they fall out.
- Smooth Welds: All welds are ground smooth giving Rugged Ridge Bumpers an extremely clean and finished look. Smooth ground welds also eliminate the possibility of weld "pockets" that tend to rust over time due to inadequate paint coverage.
- Light Tabs: The Rugged Ridge Front Tube Bumper has two welded light tabs offering easy mounting of offroad lights.
- Winch Cut-Out: The winch mount version of the Front Tube Bumper has a cut-out in the center of the bumper to clear the fairlead. The cut-out makes installing a winch extremely easy and requires no modifications.
- Tire Cut-Out: The Jeep Rear Tube Bumper features a 17" cut-out that allows users to mount up to a 31" tire on the factory spare tire mount without interfering with the tube bumper. The rear cut-out bumper is a Rugged Ridge exclusive.
- Rear Hitch: An optional frame mounted 2" reciever hitch is available for lightweight towing. Most competitor's tube bumpers don't recommend towing, making a rear hitch virtually useless.
| Rugged Ridge Dual Tubular Bumpers | |
 |
Rugged Ridge Bumper Stainless Steel The Rugged Ridge Tube Bumpers offer a clean, finished look. Bumpers are E-Coated to ensure years of rust free service. |
 |
Front Bumper with Winch Cut-Out The Rugged Ridge Front Tube Bumper is available with a Cut-Out allowing for easy winch installation that doesn't require modifications. The Cut-Out allows easy access and unrestricted use of the roller fairlead. |
 |
Front Bumper with Riser The Front Tube Bumper is available in a dual tube design with a Riser for those who demand extra protection and added looks. |
 |
Front Bumper without Riser The Rugged Ridge Front Tube Bumper is available in a standard dual tube design for those who do not desire a riser. |
 |
Rugged Ridge Rear Tube Bumper The Rugged Ridge Rear Tube Bumpers are matching counterparts to the Front Tube Bumpers. The Rear Tube Bumpers are available gloss black, textured black, stainless steel, and titanium finishes. |
 |
Rear Tube Bumper with Cut-Out The Dual Rear Tube Bumpers feature a large 17" Cut-Out design. The Rugged Ridge exclusive cut-out allows users to mount oversize tires up to 31" onto the stock spare tire carrier without interfering with the rear bumper. |
 |
Rear Tube Bumper with Hitch The Rear Reciever Hitch mounts securely and discreetly behind the Rear Tube Bumper. The hitch mounts to the vehicle frame and allows the use of rear hitch carriers as well as vehicle towing. |
 |
Dual Light Tabs The Rugged Ridge Front Tube Bumpers come with dual light tabs. This allows for quick and easy mounting of lights without having to drill or damage the bumper or protective finishes. |
 |
Smooth Polished Welds All welds are ground smooth and polished to give an exceptionally smooth and clean look. The ground welds also eliminate small weld pockets that often rust due to inadequate paint and protective coating coverage. |
 |
Welded End Caps The Rugged Ridge Tube bumpers offer fully welded end caps. Welded end caps provide a water tight seal and will never drop out or get lost. |
 |
Light Mounting Bracket The optional Light Bracket is available for the Tube Bumpers. The mount bracket clamps to the bumper tube and requires no drilling or grinding, eliminating the need to disturb the bumpers finish and compromising rust protection. |
 |
License Plate Mounting Bracket The optional liscense plate mounting bracket is available for all tubular bumper designs. |
 |
Optional Rear Reciever Hitch The optional Rear Reciever hitch was designed to work with the Rear Tube Bumpers. These hitches feature a 2" reciever tube and attach to the vehicles frame, allowing the hitch to actually be used for towing. |
 View available Part Numbers for this Product Line |
